Текст страницы
Hints and Tips
O Juice from dark green (broccoli,
spinach etc.) or dark red (beetroot,
red cabbage etc.) vegetables is
extremely strong, so always dilute it.
O The processing of spices is not
recommended as they may damage
the plastic parts.
O Do not process hot ingredients
allow to cool before processing.
O Fruit juice is high in fructose (fruit
sugar), so people with diabetes
or low blood sugar should avoid
drinking too much.
22 Grinding Mill
a
Lid
b
Mill blade assembly
Assemble the Mill as shown in
illustration 22
To dismantle the Juicer
Reverse the assembly procedure.
To remove the pulp container from base
unit - press the release lever on the base
unit and rotate the pulp container anti-
clockwise. Then lift off.
Note:
Juice Outlet (spout)
O
To prevent leakage during processing
the lid has been designed to fit
tightly to the blade assembly.
O
The spout is designed to be
removable for cleaning. Pull the
spout to remove.
O
The lid cannot be removed from the
blade assembly whilst fitted to the
power unit.
O
To refit after cleaning - push the
spout fully on.
O
Always fill and assemble before
fitting to the outlet.
Hints & tips
O For optimum performance when
processing spices do not process
more than 50g at a time.
O Whole spices retain their flavour for
a much longer time than ground
spices so it is best to grind a small
quantity fresh at a time to retain the
flavour.
O To release the maximum flavour
and essential oils whole spices are
best roasted prior to milling.
O Cut ginger and coconut into small
pieces before processing.
21 Compact Chopper/Mill
a
Base
b
Blade unit
c
Sealing ring
d
Jar
Assemble the Mill as shown in
illustration 21
1
Put your ingredients into the jar.
2
Ensure the sealing ring is correctly
fitted on the blade unit. Leaking
will occur if the seal is not fitted
correctly.
3
Turn the blade unit upside down.
Lower it into the jar, blades down.
4
Screw the base onto the jar until it is
finger-tight.
5
Place the mill onto the outlet with
the arrow on the mill base towards
the back of the machine. Turn the
mill clockwise to lock firmly into
place until the two arrows align .
6
Switch on to maximum speed.
13