Текст страницы
en
Cleaning and servicing
■
■Attach the blender jug (match arrow on the
Fig. F shows guide values for the maximum
quantities and processing times when
working with the universal cutter.
Fig. E
■
■Put down universal cutter jug with the
opening face up.
■
■Add food, which is to be cut, in the jug.
Note MAX mark on the jug!
■
■Place seal on the blade insert. Ensure that
jug to the dot on the appliance .) and
rotate as far as possible in a clockwise
direction (,).
■
■Add ingredients.
Maximum capacity, liquid = 1.0 litres
(frothing or hot liquids max. 0.4 litres).
Optimal processing capacity –
solids = 80 g.
■
■Attach lid and press firmly. Hold lid while
working.
■
■Insert the mains plug.
■
■Set the rotary switch to the desired setting.
the seal is positioned correctly.
Important information
If the seal is damaged or not correctly
positioned, liquid may run out.
■
■To add more ingredients, set the rotary
■
■Insert blade insert (p/q) into
switch to P.
■
■Remove the lid and add ingredients
or
the universal cutter jug and lock
anti-clockwise (m).
■
■Turn universal cutter over (blade insert
■
■remove the funnel and gradually add solid
face down).
■
■Attach the universal cutter (arrow on jug
ingredients through the refill opening
or
■
■pour liquid ingredients through the funnel.
After using the appliance
on dot on the appliance .) and rotate all
the way clockwise (,).
■
■Insert the mains plug.
■
■Set the rotary switch to P.
■
■Remove mains plug.
■
■Rotate the blender in an anti-clockwise
direction and remove.
■
■Remove lid.
■
■Loosen blade insert clockwise (l) and
remove from the blender jug.
■
■Clean all parts, see “Cleaning and
■
■Set the rotary switch to the desired setting.
Note: The longer the appliance remains
switched on, the finer the ingredients are cut.
Recommendations on using the accessories
can be found in the section “Recipes/
Ingredients/Processing”.
After using the appliance
■
■Set the rotary switch to P.
■
■Remove mains plug.
■
■Rotate universal cutter anti-clockwise and
servicing”.
Universal cutter
Use (depending on model):
–
– With the blade insert with blender/cutting
remove.
■
■Turn universal cutter over (blade insert
face up).
■
■Loosen blade insert clockwise (l) and
blade p for cutting and chopping meat,
hard cheese, onions, herbs, garlic, fruit,
vegetables.
–
– With the blade insert with grinding blade
remove from the universal cutter jug.
■
■Empty jug.
■
■Clean all parts, see “Cleaning and
servicing”.
q for grinding and cutting fairly small
quantities of spices (e.g. pepper, cumin,
juniper, cinnamon, dried anise, saffron),
grain (e.g. wheat, millet, linseeds), coffee
and sugar.
Cleaning and servicing
The appliance requires no maintenance.
Thorough cleaning protects the appliance
from damage and keeps it functional.
An overview of cleaning the individual parts
can be found in Fig. G.
W
W Risk of injury from sharp blades /
rotating drive!
Do not remove/attach the universal cutter
until the drive has stopped.
Do not touch blades of the blade insert with
bare hands. Clean them with a brush.
18