Текст страницы
EN
LASER DISTANCE METER
LASER DISTANCE METER
EN
XP3 GREEN CONDTROL
XP3 GREEN CONDTROL
User manual
User manual
Press
Second measurement.
If sound signal is on, when approaching the stake-
out point the product emits sound signal. When
reaching the stake-out point symbol appears
on the display and sound signal tonality is changed.
– first measurement
– second measurement
– distance between the object and stake-out point
of last measured distance. This value will increase
after each next measurement by the value of last
taken measurement.
– value of distance A
– result of addition/subtraction of 2
measurements
– value of distance В
To do addition/subtraction of more than 2 measurements press and
– current distance to the next stake-out point.
perform the above mentioned operations required number of times.
Press
Exit the mode.
Mark point А and go on moving the product
along stake-out line until you reach point B. If it
is necessary to transfer several equal distances,
repeat the last operation required number of
times.
CALCULATIONS
Area
Press
Stop the measurement
Press
Activate function of area calculation. Symbol
appears on the display. Laser beam is on.
* If press and hold or the speed is increased.
Press
First measurement (length).
Addition/Subtraction
Press
Second measurement (width).
Press
Switch on the laser beam. Aim the product at the
object of measurement.
Press
First measurement.
Measuring result appears in the main line.
– length
– width
Press or
Activate addition or subtraction .
– area
Press
Switch on the laser beam. First measuring result
moves to the line 2 on the display.
11
10