Текст страницы
EN
LASER DISTANCE METER
LASER DISTANCE METER
EN
XP3 GREEN CONDTROL
XP3 GREEN CONDTROL
User manual
User manual
Wall area
Press
Third measurement (height).
Activate function of wall area calculation.
Symbol appears on the display.
Press
2 times
Laser beam is on.
Press
First measurement (height).
– length
Press
Second measurement (length 1).
– width
– height
Press
Third measurement (length 2).
– volume
Point-to-point measurement
– height
Symbol appears on the display.
– length 1
Long press
for 1 sec.
Laser beam is on. Line is flashing.
– length 2
Press
First measurement (distance to point 1)
– wall area
Press
Second measurement (distance to point 2)
Press
3rd, 4th, 5th etc. measurements can be done
unlimited number of times. Each new wall surface
is added to previously calculated wall area result.
Volume
– distance to point 1 (measured)
Activate function of volume calculation.
Symbol appears on the display.
– distance to point 2 (measured)
Press
3 times
Laser beam is on.
– distance between points 1 and 2 (calculated)
Press
First measurement (length).
Press
Second measurement (width).
Note: Make sure that the starting point of the
measurement (for example, the bottom end of the
device) is the same in both measurements.
13
12