Текст страницы
CROSS
LINE LASER
EN
CROSS
LINE LASER
EN
XLiner Duo/Combo 360
XLiner Duo/Combo 360
user manual
user manual
TECHINCAL SPECIFICATIONS
Working range/with receiver
40 m/80 m
Self-levelling accuracy
±0,2 mm/m
Self-levelling range
± 4°
OPERATION
Before start operation remove the battery cover, insert the batteries,
observing correct polarity. Put battery cover back.
Use AA alkaline batteries only, all batteries should be of the same type
and brand with the same charge level. Replace batteries if battery
charge level indicator starts flashing red while operation.
Place the laser level on a firm and stable surface or a tripod.
Continuous working time
>8 hours
Move compensator lock to choose necessary operating mode:
Operating temperature
-10°C ... +50°C
1) Automatic levelling:
Storage temperature
-20°C ... +70°C
Move lever lock to ON position .
Relative humidity
90%
Compensator is unlocked. Power indicator becomes red. If the laser
Protection rating
IP54
level is out of the range of automatic compensation laser lines flash.
Tripod mounting thread
1/4’’ and 5/8’’
Short press button to switch on necessary laser planes.
Laser type
Class II 635 nm < 1 mW
Short press button to switch on/off pulse mode that allows
Power supply
4 х 1.5V LR6 alkaline (AA)
working with laser receiver. In this mode pulse mode indicator will
Dimensions
119x62x115 mm
turn red. To switch the laser level off move compensator lock to locked
Weight
0,445 kg
position .
2) Locked compensator, to build inclined planes and lines:
SET
Move compensator lock to OFF position . Compensator is locked.
Power indicator becomes red. Press and hold button
during 3 seconds to switch the laser level on.
Cross line laser – 1 pcs.
Carry bag – 1 pcs.
Batteries (АА) – 4 pcs.
User manual – 1 pc.
Short press button to switch on necessary laser planes.
Activated laser lines flash every 5 seconds in this mode.
8
9