Текст страницы
www.seagate.com
Drive specifications
ST10000NM021H
Drive specification
ST16000NM001H
ST16000NM002H
ST12000NM001H
ST12000NM002H
Altitude, non-operating
(below mean sea level, max)
–304.8 m to 12,192 m
(–1000 ft to 40,000+ ft)
Operational Shock (2 ms)
40 Gs
Non-Operational Shock (2 ms)
200 Gs
Linear Random Operating Vibra-
tion
5–500 Hz: 0.70 Grms
Random Rotary Operating Vibra-
tion
20–1500Hz: 12.5 rads/s²
Linear Random Non-Operating
Vibration
2–500 Hz: 2.27 Grms
Drive acoustics, sound power
(bels)
Idle
2.8 (typical)
3.0 (max)
During periods of drive idle, some offline activity may occur according to the
SMART specification, which may increase acoustic and power to operational levels.
Performance seek
3.2 (typical)
3.4 (max)
Nonrecoverable read errors
1 sector per 1015 bits read
Annualized Failure Rate (AFR)*
0.35% based on 8760 POH
Maximum Rated Workload*
Maximum rate of <550TB/year
Workloads exceeding the annualized rate may degrade the drive MTBF and impact product reliability.
The Annualized Workload Rate is in units of TB per year, or TB per 8760 power on hours. Workload
Rate = TB transferred * (8760 / recorded power on hours).
Warranty
To determine the warranty for a specific drive, use a web browser to access the following web page:
www.seagate.com/support/warranty-and-replacements/.
From this page, click on the “Is my Drive under Warranty” link. The following are required to be pro-
vided: the drive serial number, model number (or part number) and country of purchase.The system will
display the warranty information for the drive.
Load-unload cycles
600,000
Yes
Supports Hotplug operation per
Serial ATA Revision 3.3 specifica-
tion
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary
depending on operating environment and formatting.
*See Section 2.9, "Reliability" for rated MTBF device operating condition requirements.
Seagate Exos X24 SATA Product Manual, Rev. C
11