Инструкция LFF (3.5") Серверный HDD WD Ultrastar HC580

Страница 265 (стр. 265 из 357)

Бренд: LFF

Страница 265 документа LFF (3.5") Серверный HDD WD Ultrastar HC580. Раздел: Western Digital. Бренд: LFF.

Текст страницы

Normal Outputs
See Normal Outputs in Section 12.38.2

Error Outputs
See Error Outputs in Section 12.38.2

The ABORT bit is set to one if a SANITIZE DEVICE FREEZE LOCK EXT command has successfully completed since
the last power-on reset.
The device returns command aborted if:

a) the device is in the SD3:Sanitize Operation Failed state
b) the completed sanitize command (i.e., CRYPTO SCRAMBLE EXT (data encryption model only), or

OVERWRITE EXT) contained the FAILURE MODE bit cleared to zero
c) an OVERWRITE EXT command with the FAILURE MODE bit set to one is received.
The ZONED NO RESET bit is only applicable on Zoned devices.
An INVERT PATTERN BETWEEN OVERWRITE PASSES bit set to one specifies that the OVERWRITE PATTERN
field shall be inverted on each overwrite pass. An INVERT PATTERN BETWEEN OVERWRITE PASSES bit cleared
to zero specifies that the overwrite pattern shall not be inverted.
If the INVERT PATTERN BETWEEN OVERWRITE PASSES bit is set to one and:

1. the DEFINITIVE ENDING PATTERN SUPPORTED bit is set to one and the DEFINITIVE ENDING PATTERN

bit is set to one, then the pattern used for the first write pass shall consist of the user data set to:

a. the inversion of the OVERWRITE PATTERN field, if the OVERWRITE PASS COUNT field is set to an even

number;
b. the OVERWRITE PATTERN field, if the OVERWRITE PASS COUNT field is set to an odd number;
or

2. the DEFINITIVE ENDING PATTERN SUPPORTED bit is cleared to zero or the DEFINITIVE ENDING

PATTERN bit is cleared to zero, then the pattern used for the first write pass may consist of the user data set
to:

a. the inversion of the OVERWRITE PATTERN field; or
b. the OVERWRITE PATTERN field.
The OVERWRITE PASS COUNT field specifies the number of overwrite passes (i.e., how many times the data in the
user area is to be overwritten) using the data from the OVERWRITE PATTERN field of this command. An overwrite
pass count of zero specifies 16 overwrite passes.
The OVERWRITE PATTERN field specifies a 32-bit pattern that shall be repeated as necessary to fill each physical
sector within the Sanitize operation scope.

265
Hard Disk Drive Specification