Текст страницы
3.
Slide the rip fence to the desired cutting radius,
and tighten the bolt to secure it in place.
MAINTENANCE
NOTE: Always use jig saw blades No. B-17, B-18,
B-26 or B-27 when cutting circles or arcs.
Guide rail adapter set
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
Optional accessory
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
When cutting parallel and uniform width or cutting
straight, the use of the guide rail and the guide rail
adapter will assure the production of fast and clean
cuts. To install the guide rail adapter, insert the rule bar
into the rectangular hole on the side of the base as far
as it goes. Secure the bolt with the hex wrench securely.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
1
OPTIONAL ACCESSORIES
3
2
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
Fig.28
► 1. Hex wrench 2. Rule bar 3. Bolt
Insert the rule bar into the square hole of the guide rail
adapter, and secure the screw firmly. Place the guide
rail adapter on the guide rail.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Jig saw blades
•
Hex wrench 4
•
Rip fence (guide rule) set
•
Guide rail adapter set
•
Guide rail set
•
Anti-splintering device
•
Cover plate
•
Dust nozzle assy
•
Makita genuine battery and charger
1
2
3
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Fig.29
► 1. Guide rail adapter 2. Guide rail 3. Screw
NOTICE: Always use jig saw blades No. B-8, B-13,
B-16, B-17 or 58 when using the guide rail and the
guide rail adapter.
14
ENGLISH