Текст страницы
2.3
M.2 module installation
NOTE:
• The illustrations only show the installation steps for selected M.2 slots, the steps are the same
for the other M.2 slots.
• Use a Phillips screwdriver when removing or installing the screws or screw stands mentioned in
this section.
• If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it with a
thermal pad with a thickness of 1.25mm.
• Supported M.2 type varies per motherboard.
1.
(optional) Loosen the screws from the M.2 heatsink(s).
2.
(optional) Lift and remove the heatsink(s).
NOTE: Only follow the steps above if the slot comes with a heatsink.
1
1
2
3.
Install your M.2 module to your M.2 slot. The steps may differ between the different
M.2 slots, please refer to the different installation steps below:
Installing an M.2 module to M.2 slot using the M.2 Q-Latch
A.
(optional) Install the bundled M.2 rubber if you are installing a single
sided M.2 module. DO NOT install the bundled M.2 rubber when
installing a double-sided M.2 module. The rubber installed by default
is compatible with double sided M.2 modules.
NOTE: Only follow this step if installing a 22110 length M.2 module and when the M.2 rubber
comes bundled with your motherboard package.
38