Текст страницы
2.3
M.2 module installation
NOTE:
• Use a Phillips screwdriver when removing or installing the screws or screw stands mentioned in
this section.
• If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it with a
thermal pad with a thickness of 1.25mm.
• Supported M.2 type varies per motherboard.
To install an M.2 module to M.2_1 slot
1.
Loosen the screws from the M.2 heatsink.
2.
Lift and remove the heatsink.
1
1
2
3.
Install your M.2 module to your M.2 slot. The steps may differ between installing M.2
of different lengths, please refer to the different types and their installation steps
below:
35