Текст страницы
Memory configurations
You may install 4 GB, 8 GB, 16 GB, and 32 GB unbuffered and non‑ECC DDR4 DIMMs into
the DIMM sockets.
For Intel® Core™ X-Series Processors (6-core or above), you may install varying memory
sizes in Channel A, Channel B, Channel C, and Channel D. The system maps the total
size of the lower-sized channel for the quad-channel configuration. Any excess memory
from the higher-sized channel is then mapped for single-channel operation.
Chapter 1
•
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.
•
For system stability, use a more efficient memory cooling system to support a full
memory load or overclocking condition.
•
Always install the DIMMS with the same CAS Latency. For an optimum compatibility,
we recommend that you install memory modules of the same version or data code
(D/C) from the same vendor. Check with the vendor to get the correct memory
modules.
•
Visit the ASUS website for the latest QVL.
1-6
Chapter 1: Product Introduction