Текст страницы
3.7
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Qfan Configuration
Qfan Tuning
Click this item to automatically detect the lowest speed and configure the minimum
duty cycle for each fan.
AIO PUMP/Water PUMP+ Control
[Disabled]
Disable the AIO Pump/Water Pump control feature.
[Auto]
Detects the type of AIO Pump/Water Pump installed and
automatically switches the control modes.
[DC mode]
Enable the AIO Pump/Water Pump control in DC mode for 3-pin
chassis fan.
[PWM mode]
Enable the AIO Pump/Water Pump control in PWM mode for 4-pin
chassis fan.
3.8
Boot menu
The Boot menu items allow you to change the system boot options.
Fast Boot
[Disabled]
Allows your system to go back to its normal boot speed.
[Enabled]
Allows your system to accelerate the boot speed.
The following items appear only when Fast Boot is set to [Enabled].
Next Boot after AC Power Loss
[Normal Boot]
Returns to normal boot on the next boot after an AC power loss.
[Fast Boot]
Accelerates the boot speed on the next boot after an AC power loss.
Chapter 3
Boot Configuration
Setup Mode
[Advanced Mode]
This item allows you to go to Advanced Mode of the BIOS after
POST.
[EZ Mode]
This item allows you to go to EZ Mode of the BIOS after POST.
CSM (Compatibility Support Module)
This item allows you to configure the CSM (Compatibility Support Module) items to fully
support the various VGA, bootable devices and add-on devices for better compatibility.
3-22
Chapter 3: BIOS Setup