Текст страницы
1.4
DIMM installation
The figure illustrates the location of the DDR5 DIMM sockets.
CAUTION! A DDR5 memory module is notched differently from a DDR, DDR2, DDR3, or DDR4
module. DO NOT install a DDR, DDR2, DDR3, or DDR4 memory module to the DDR5 slot.
Recommended memory configurations
You may install Non-ECC DDR5 DIMMs into the DIMM sockets.
NOTE:
• The default memory operation frequency is dependent on its Serial Presence Detect (SPD),
which is the standard way of accessing information from a memory module. Under the default
state, some memory modules for overclocking may operate at a lower frequency than the
vendor-marked value.
• For system stability, use a more efficient memory cooling system to support a full memory load
or overclocking condition.
• Always install the DIMMs with the same CAS Latency. For an optimum compatibility, we
recommend that you install memory modules of the same version or data code (D/C) from the
same vendor. Check with the vendor to get the correct memory modules.
• Visit the ASUS website for the latest QVL.
1-11
Motherboard User Manual