Текст страницы
2-4
Installing the Memory
Read the following guidelines before you begin to install the memory:
•• Make sure that the motherboard supports the memory. It is recommended that memory of the same
capacity, brand, speed, and chips be used. (Go to GIGABYTE's website for the latest supported
memory speeds and memory modules.)
•• Always turn off the computer and unplug the power cord from the power outlet before installing the
memory to prevent hardware damage.
•• Memory modules have a foolproof design. A memory module can be installed in only one direction.
If you are unable to insert the memory, switch the direction.
•• When installing memory modules, be sure to install in the DDR5_A2 socket first.
CPU
DRAM
* Recommended Memory Configurations:
VGA
BOOT
DDR5_A1
DDR5_A2
DDR5_B1
DDR5_B2
1 Module
- -
a
- -
- -
2 Modules*
- -
a
- -
a
4 Modules*
a
a
a
a
("a"=Installed, "- -"=No Memory)
("*"=Recommended Dual Channel Memory Configurations)
The memory status LED will light up if
the memory module is installed in the
incorrect slot before booting. Ensure
that the memory module is installed in
the correct slot. Refer to the table for
memory installation instructions.
DDR5_A1
DDR5_A2
DDR5_B1
DDR5_B2
Dual Channel Memory Configuration
This motherboard provides four memory sockets and supports Dual Channel Technology. After the memory
is installed, the BIOS will automatically detect the specifications and capacity of the memory. Enabling Dual
Channel memory mode will double the original memory bandwidth.
The four memory sockets are divided into two channels and each channel has two memory sockets as following:
Channel A: DDR5_A1, DDR5_A2
Channel B: DDR5_B1, DDR5_B2
Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.
- Dual Channel mode cannot be enabled if only one memory module is installed.
- When enabling Dual Channel mode with two or four memory modules, it is recommended that memory of
the same capacity, brand, speed, and chips be used.
- 13 -