Текст страницы
•• M2P_SB:
Step 1:
Turn the M.2 EZ-Latch Click clip clockwise and remove the motherboard heatsink. Locate the proper
mounting hole for the M.2 SSD to be installed and secure the M.2 EZ-Latch Plus clip in the hole first.
Step 2:
Insert the M.2 SSD into the M.2 connector at an angle. Press down on the front end of the M.2 SSD
and make sure the M.2 SSD is secured by the clip.
•• Removing and Installing the M.2 EZ-Latch Plus clip:
Removal:
jRotate the latch clockwise by 45 degrees until you hear a "click."
kPull the M.2 EZ-Latch Plus clip straight up vertically.
Installation:
j
Align the notch on the M.2 EZ-Latch Plus clip with the notch on the motherboard,
and insert it vertically downward.
kRotate it counterclockwise by 45 degrees until you hear a "click."
&
&
Please visit GIGABYTE's website for details on using M.2 EZ-Latch Click/M.2 EZ-Latch Plus.
M.2 SSD installation with M.2 EZ-Latch Click: https://www.gigabyte.com/WebPage/1048/M.2-EZ-Latch-Click.html
M.2 SSD installation/removal with M.2 EZ-Latch Plus: https://www.gigabyte.com/WebPage/1098/M2-latchplus-simple.html
* Motherboard heatsink design may vary by model.
- 24 -