Текст страницы
2-6
Back Panel Connectors
USB 2.0/1.1 Port
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices.
USB 3.2 Gen 1 Port
The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specification and is compatible to the USB 2.0
specification. Use this port for USB devices.
DisplayPort (Note 1)
DisplayPort delivers high quality digital imaging and audio, supporting bi-directional audio transmission.
You can use this port to connect your DisplayPort-supported monitor. Note: The DisplayPort Technology
can support a maximum resolution of 3840x2160@144 Hz but the actual resolutions supported depend
on the monitor being used.
USB4® USB Type-C® Port (DisplayPort (Note 1))
This port supports standard USB4® USB Type-C® and DisplayPort display output. You can connect a USB4®
USB Type-C® monitor to this port or use an adapter cable to connect a standard DisplayPort monitor. The
maximum supported resolution is 3840x2160@144 Hz when using a DisplayPort monitor, but the actual
resolutions supported are dependent on the monitor being used. Also, the connector is reversible and
supports the USB4® specification and is compatible to the USB 3.2 Gen 2x2, USB 3.2 Gen 2, USB 3.2
Gen 1, and USB 2.0 specifications. You can use this port for USB devices, too.
After installing the DisplayPort device, make sure to set the default sound playback device to
DisplayPort. (The item name may differ depending on your operating system.)
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 2.5 Gbps data rate. The following
describes the states of the LAN port LEDs.
Speed LED:
Activity LED:
Activity LED
Speed LED
State
Description
Blinking
Data transmission or receiving is occurring
Off
No data transmission or receiving is occurring
State
Description
Orange
2.5 Gbps data rate
Green
1 Gbps data rate
Off
100 Mbps data rate
LAN Port
(Note 1) Actual support may vary by CPU.
•• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
•• When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent
an electrical short inside the cable connector.
- 16 -