Текст страницы
JOCFS1: Safe Boot Jumper
This jumper is used for Safe Boot. Once enabled, the system will boot with default
settings and lower PCIe (from CPU) mode.
Enabled
Normal
(default)
Boot with the saved
BIOS settings.
Apply the BIOS default
settings and lower PCIe
(from CPU) mode for
Safe Boot.
JDASH1 : Tuning Controller connector
This connector is used to connect an optional Tuning Controller module.
2
6
1
5
Pin
Signal Name
Pin
Signal Name
1
No Pin
2
NC
3
MCU_SMB_SCL_M
4
MCU_SMB_SDA_M
5
VCC5
6
Ground
JCOM1 : Serial Port connector
This connector allows you to connect the optional serial port with bracket.
2
10
1
9
Pin
Signal Name
Pin
Signal Name
1
DCD
2
SIN
3
SOUT
4
DTR
5
Ground
6
DSR
7
RTS
8
CTS
9
RI
10
No pin
40