Текст страницы
JUSB1~2: USB 2.0 Connectors
These connectors allow you to connect USB 2.0 ports on the front panel.
2
10
1
9
Pin
Signal Name
Pin
Signal Name
1
VCC
2
VCC
3
USB0-
4
USB1-
5
USB0+
6
USB1+
7
Ground
8
Ground
9
No Pin
10
NC
⚠Important
∙Note that the VCC and Ground pins must be connected correctly to avoid possible
damage.
∙In order to recharge your iPad, iPhone and iPod through USB ports, please install
MSI Center utility.
JOCFS1: Safe Boot Jumper
This jumper is used for Safe Boot. Once enabled, the system will boot with default
settings and lower PCIe (from CPU) mode.
Normal
Enabled
(default)
Boot with the saved
BIOS settings.
Apply the BIOS default
settings and lower PCIe
(from CPU) mode for
Safe Boot
33