Текст страницы
5 Scan
Before Scanning
4 Do one of the following:
Before attempting to scan, confirm the
following:
• To change the settings, press
[Options] or [Set at Device],
and then go to the next step.
• Make sure you have installed the Brother
software and drivers.
• Press [Start] to start scanning
without changing additional settings.
• Make sure the USB or network cable is
connected correctly, or that you are
connected to the network using your
wireless access point/router.
The machine starts scanning. If using
the machine's scanner glass, follow
the LCD instructions to complete the
scanning job.
Scan from Your Computer
To use the [Options] or [Set at
Device] settings, a computer with
ControlCenter4 (Windows®) or Brother
iPrint&Scan (Mac) installed must be
connected to the machine.
There are several ways you can use your
computer to scan photos and documents on
your Brother machine. Use the software
applications provided by Brother, or use your
favourite scanning application.
5
Change the scan settings you want to
change, such as scan type, resolution,
file type and document size, if needed.
When finished press [OK].
For more detailed information, see the Online
User's Guide: Scan from Your Computer
(Windows®) or Scan from Your Computer
(Mac).
6 Press [Start].
The machine starts scanning. If using
the machine's scanner glass, follow the
LCD instructions to complete the
scanning job.
Scan Using the Scan Button on the Machine
1 Load your document.
2 Press [Scan] > [to PC] > [to File].
3
If the machine is connected over the
network, press a or b to display the
computer where you want to send data,
and then press the computer name.
If the LCD prompts you to enter a PIN,
use the LCD to enter the four-digit PIN for
the computer, and then press [OK].
12