Текст страницы
Light behavior
Cause and Solution
The letter E and the number 0 are blinking. At the same time, one
or both of the Ink Level icons are blinking and the Ink Alert light
is blinking.
There is a problem with the indicated cartridges. Check for an
error message in the HP Smart app or in the printer software and
resolve it by following the on-screen instructions.
The letter E and the number 1 are blinking. At the same time, the
Resume light is blinking.
The printer receives a printing job, starts feeding paper, and
detects that the paper width for the printing job is bigger than the
width of the loaded paper.
Press either the Resume button (
) or the Cancel button
(
) to cancel the printing job and eject paper.
To avoid the paper size mismatch problem, do one of the
following before printing.
●
Change the paper size setting for the printing job to match
the paper loaded.
●
Remove all paper from the input tray, and then load paper
that matches the paper size setting for the printing job.
TIP:
You can change the default paper size automatically
detected by the printer. For more information, see Change the
default paper size detected by printer on page 16.
The letter E and the number 2 are blinking. At the same time, the
Resume light is blinking.
The printer receives a multipage printing job, detects that the
paper length for the printing job does not match the length of the
loaded paper, and then prints out the first page of the job with
errors.
●
To cancel the printing job, press the Cancel button (
).
●
To continue printing the remaining pages, press the Resume
). The remaining pages will have the same
button (
errors as the first page.
TIP:
You can change the default paper size automatically
detected by the printer. For more information, see Change the
default paper size detected by printer on page 16.
ENWW
Get help in this guide
91