Текст страницы
Avoiding material damage en
▶Never let the power cord come into contact with hot parts or be
dragged over sharp edges.
▶Never place the appliance on or near hot surfaces.
▶After switching off, wait until the drive has come to a complete
standstill.
▶Keep hands, hair, clothing and utensils away from rotating parts.
▶Never leave the appliance switched on if the power supply is in-
terrupted. The appliance will automatically start up again follow-
ing the interruption in the power supply.
▶Process hot food carefully.
▶Leave boiling food to cool down to at least 70 °C before pro-
cessing.
▶Follow the cleaning instructions.
▶Clean surfaces which come in contact with food before each
use.
Avoiding
material
damage
Avoiding material damage
Avoiding
material
damage
Note: If an accessory is not included in the
scope of supply, it can be ordered from
customer service.
▶Do not operate the appliance at no-load.
▶Never use the blender jug in the mi-
crowave or oven.
Operating
elements
Operating elements
Overview
Overview
Overview
→ Fig. 1
1
Switch
2
Ejector button
3
Release buttons
Operating
elements
Ejector button
For removing the tools.
Note: The Ejector button cannot be actu-
ated unless the switch is in the position.
Release buttons
For removing the accessories from the rear
aperture.
Switch
Symbol
Function
4
Apertures (with lock) for inserting
the tools
5
Cable clip1
6
Self-closing rear aperture
switched off
lowest speed
7
„Fine Creamer“ beating whisks
highest speed
8
Kneading hooks
9
Lid1
10
Plastic blender jug1
Instantaneous switching
(highest speed) press to
the left and hold in place
11
High-speed hand blender1 2
12
Universal cutter1 2
Note: When the rear aperture is open, the
selector switch will not function between
levels and .
1 Depending on the model
2 separate operating instructions
Printed on 100% recycled paper
11