Инструкция монитор MSI PRO MP273Q E2

Safety Instructions (стр. 23 из 28)

Бренд: MSI

Страница 23 документа Монитор MSI PRO MP273Q E2. Раздел: Мониторы. Бренд: MSI.

Текст страницы

Safety Instructions

∙Read the safety instructions carefully and thoroughly.

∙All cautions and warnings on the device or User Guide should be noted.

∙Refer servicing to qualified personnel only.

Power

∙Make sure that the power voltage is within its safety range and has been adjusted

properly to the value of 100~240V before connecting the device to the power outlet.

∙If the power cord comes with a 3-pin plug, do not disable the protective earth pin

from the plug. The device must be connected to an earthed mains socket-outlet.

∙Please confirm the power distribution system in the installation site shall provide

the circuit breaker rated 120/240V, 20A (maximum).

∙Always disconnect the power cord or switch the wall socket off if the device would

be left unused for a certain time to achieve zero energy consumption.

∙Place the power cord in a way that people are unlikely to step on it. Do not place

anything on the power cord.

∙If this device comes with an adapter, use only the MSI provided AC adapter approved

for use with this device.

Environment

∙To reduce the possibility of heat-related injuries or of overheating the device, do not

place the device on a soft, unsteady surface or obstruct its air ventilators.

∙Use this device only on a hard, flat and steady surface.

∙To prevent the device from tipping over, secure the device to a desk, wall or fixed

object with an anti-tip fastener that helps to properly support the device and keep it
safe in place.

∙To prevent fire or shock hazard, keep this device away from humidity and high

temperature.

∙Do not leave the device in an unconditioned environment with a storage temperature

above 60℃ or below -20℃, which may damage the device.

∙The maximum operating temperature is around 40℃.

∙When cleaning the device, be sure to remove the power plug. Use a piece of soft

cloth rather than industrial chemical to clean the device. Never pour any liquid into
the opening; that could damage the device or cause electric shock.

∙Always keep strong magnetic or electrical objects away from the device.

23

Оглавление