Текст страницы
CHEST FREEZER
– chlorine-containing agents and acids when cleaning the freezer.
CLEARING
Keep the chest freezer and the door seal clean. Before washing, disconnect it from
the power supply!
1. Wash the chest freezer outside and inside with a clean cloth soaked in warm water
with liquid detergent. Then wipe dry with a dry cloth.
2. Do not use sharp metal scrapers, caustic and abrasive cleaners, as they can scratch
the surfaces of the chest freezer.
3. Do not use a high-pressure cleaner or steam jet cleaners, as penetrating moisture
can cause electric shock.
4. After cleaning, check that the power cord is not damaged. Then insert the plug firmly
into the wall outlet.
ATTENTION! Do not use abrasive substances, gasoline, benzene, solvents, hot
water, metal, or coarse brushes, etc. for cleaning, as they can damage the surface
of the freezer.
TROUBLESHOOTING
During operation, if any malfunctions are detected that the consumer cannot eliminate
on their own, it is necessary to contact the service workshop for the repair of freezer
equipment.
But before contacting the repair service, read this section. This list includes the most
common cases that are not the result of poor assembly quality or poor-quality materials
used in this device.
ATTENTION! Before troubleshooting, you must disconnect the product from
the mains. Troubleshooting that is not described in this manual should only be
carried out by a qualified electrician or a competent technician.
Malfunction
Possible cause
Solution
The plug is not plugged in or
not fully plugged in.
Plug the power cord plug into the wall
outlet.
The chest freezer
does not work.
The fuse is blown or faulty.
Check the fuse. Replace it if necessary.
The plug is faulty.
The fault is fixed by an electrician.
The chest freezer is
exceptionally cold.
The temperature is set to very
low.
Adjust the temperature to higher values.
28
USER GUIDE