Инструкция мойка высокого давления Bort BHR-1700-Pro

Страница 8 (стр. 8 из 32)

Бренд: Bort

Страница 8 документа Мойка высокого давления Bort BHR-1700-Pro. Раздел: Мойки высокого давления и оснастка. Бренд: Bort.

Текст страницы

• Quick nozzles;

ENGLISH
GB

• Nozzle cleaning pin.

Product Life:

HIGH PRESSURE CLEANER

The service life of the product is 5 years.
Production date:

Is indicated on the packaging of the goods.
Shelf life:

INTRODUCTION
The high pressure cleaner is quick and efficient for clean­
ing vehicles, machines, boats, buildings, etc. , by the re­
moval of stubborn dirt using clean water and chemical
detergents.

Shelf life is not limited (subject to storage conditions).
Storage conditions:

When using chemical detergents, only use biodegradable
types. Only clean vehicle engines in areas in which suita­
ble oil traps are installed.

TECHNICAL SPECIFICATIONS (FIG. 1)

Products are stored in dry, ventilated warehouses at tem­
peratures from 0 ° C to +40 ° C with a relative humidity of
not more than 80%.
Transportation:

Power consumption
1 600 W

It is strongly prohibited dropping and any mechanical im­
pact on the packaging during transportation.

Max pressure
120 bar

Working pressure
90 bar

When unloading / loading, it is not allowed to use any
type of equipment that works on the principle of packing
clamping.

Maximum output
7 l/min /
420 l/min

Auto-sucking function
+

Automatic blocking
+

SAFETY INSTRUCTIONS
When using electric machines always observe the safety
regulations applicable in your country to reduce the risk
of fire, electric shock and personal injury. Read the fol­
lowing safety instructions and also the enclosed safety
instructions.
Keep these instructions in a safe place!

Hose
4 m

Power cord length
4 m

Electrical safety
Always check if your mains voltage corresponds with the
value on the type plate.

Voltage / Current
frequency
220 V / 50 Hz

Product weight
4 kg

When replacing old cables or plugs: throw away old
cables or plugs immediately as soon as new ones have
replaced these. It is dangerous to put the plug of a loose
cable into the socket outlet.

PRODUCT ELEMENTS (FIG. 2)
1.
Handle;

2.
Adjust switch OFF/ON;

3.
Water outlet;

When using extension cables:
Only use an approved extension cable that is suitable for
the machine’s power. The cores must have a diameter of
at least 1. 5 mm2. When the extension cable is on a reel,
unroll the cable in its entirety.

4.
Power cord hook;

5.
Power cord;

6.
Spray wand connector;

All electrical connections e. g. extension cable, must be of
an approved waterproof type for outdoor use and marked
accordingly. Extension cables must be threecore, one of
which is EARTH.

7.
Spray wand holder;

8.
Water inlet;

Switch off the machine immediately in case of:

9.
Trigger gun;

13. Malfunction in the mains plug, power cable or damag­
ing of cable.

10. Trigger gun holder;

14. Broken switch.

11. Spray wand;

15. Smoke or stench of scorched insulation.

12. High-pressure hose.

THE COMPLETE SET INCLUDES:

Specific safety rules

• Adjustable spray nozzle;

• Do not disconnect the plug by pulling on the electrical
cable.

• Pressure hose;

• Filter;

• Foam generator;

• If you are too far from the object you wish to clean, do
not move the cleaner nearer by pulling on the high pres­
sure hose; use the handle provided.

8