Текст страницы
3. Battery Level Percentage
EN
Product Overview
When the display shows "LO", it indicates
that the battery level is lower than 10%.
Accessories
4. Suction Level
1. Extension Rod
2. Smart Multi-Surface Brush
The color of fan-shaped icon changes with
different modes.
3. Spin Mop Head
5. Suction Level Switch
4. Wide Combination Tool
5. Motorized Mini-Brush
Press briefly to switch between eco, med
and turbo mode.
6. Charger
7. Combination Tool
Note: The Med mode is used by default
every time the vacuum is turned on.
8. Mop Pad × 4
6. Charging/Battery Level Indicator
Blinking red: Battery level ≤ 10%
9. Wall Mount(Including screw × 2, wall
plug × 2, and mounting template sticker )
Pulsing red: Battery level ≤ 10% (charging)
Pulsing green: Battery level > 10% (charging)
7. Med
Note: The images in this manual are for
illustrative purposes only. The actual
product may differ.
8. Eco
Fig. A
9. Turbo
Component Names
1. Suction Level Switch
2. Display Screen
If the vacuum is not working properly, the
screen display will show an error message.
Please refer to the troubleshooting table to
find your solution.
3. Trigger Switch Lock
4. Extension Rod Release Button
Note: The images in this manual are for
illustrative purposes only. The actual
product may differ.
5. Extension Rod
Fig. B-2
6. Smart Multi-Surface Brush
7. Antistatic Contact
8. Charging Port
Spin Mop Head
9. LED Battery Status Indicator
1. Spin Mop Head Release Button
10. Battery Release Button
2. Outflow Control Switch
11. Power Button
Low High Off
• Press to turn on
3. Water Tank Plug
• Release to turn off
Fig. B-3
12. Dust Cup
13. Dust Cup Bottom Cover Release Button
14. Brush Release Button
Fig. B-1
Installation
Click
Fig. C-1
Introduction of Display
Screen
1. Trigger switch lock
Wall Mount Installation
Diagram
Press briefly to enter/ exit the lock state.
1. The bottom edge of the mounting
2. Lock Status
3