Текст страницы
C6-1—Light stripe in red: Error
C1 Filling the Clean Tank
C1-1—Grip the clean tank handle, press the
C7 Emptying the Dirty Tank
C7-1—Hold the dirty tank handle, press the
release button, and gently pull the
clean tank upwards at a slight angle.
C1-2—Open the cap of the clean tank refill
clean under furniture. To lay it flat on the
floor, lower the handle while using the
machine. The available capacity of the dirty
tank decreases during lay-flat cleaning.
Therefore, it is recommended to empty the
dirty tank before cleaning under furniture.
release button, and pull out the dirty
tank.
C7-2—Gently pull out the tank cover, and
port, add tap water, and then close
the cap.
Always lay the vacuum cleaner flat with the
buttons on the handle facing up.
Note:
empty the dirty tank.
C1-3—Place the clean tank back to the
C5 Mode Switching
C7-3—Reinstall the tank cover. Tilt the dirty
cleaner head. Push it down gently
until it clicks into place.
Notes:
tank, insert its bottom back in the
vacuum cleaner, and then push it
gently until it clicks into place.
Press the
button to switch between AUTO,
MAX, ECO, and Sponge modes. The screen
will display the icon of the current mode.
- To avoid deforming the clean tank, only use cold water.
- To prevent corrosion or damage, do not use
C8 Charging and Self-Cleaning
Standby and Power off
any disinfectant and only use cleaning solutions
recommended by Roborock.
• To improve cleaning performance, we recommend
1. Lock the vacuum cleaner while it is on
that you add 1/4 bottle cap of the recommended
cleaning solution to the filled clean tank.
1. Press the
button during cleaning to
pause the vacuum cleaner. It is now on
standby.
C2 Locking and Unlocking
2. Lock the vacuum cleaner while on standby
standby and place it on the charging
dock. Charging starts when you hear
the "Charging started. Please start self-
cleaning." voice massage.
so that it can stand upright on the floor.
3. If the vacuum cleaner is left idle for 5 minutes
2. Press the
button to start/pause smart
self-cleaning.
Lightly step on the cleaner head and hold the
handle. Push it to lock the vacuum cleaner,
and pull it to unlock the vacuum cleaner.
3. After self-cleaning and drying are completed,
C2-1—Locked
C2-2—Unlocked
follow the voice message and empty the dirty
tank timely to prevent odors.
while on standby, it will automatically turn off.
To manually turn the vacuum cleaner off,
press and hold the
button for 2 seconds
while it is on standby.
Notes:
C3 Starting the Vacuum Cleaner
• Make sure that the clean tank and dirty tank are
C6 Water Level Alerts
Pull the handle to unlock the vacuum
cleaner, and press the
button to start it.
in place for optimum self-cleaning and drying
performance.
• The product is equipped with a built-in high-
C4 Lay-Flat Cleaning
The vacuum cleaner can be laid flat to
performance lithium-ion rechargeable battery pack.
To maintain battery performance, keep the product
charged during normal use.
• Always place the vacuum cleaner back on the charging
When the dirty tank is full or the clean tank
is empty during use, the vacuum cleaner
will provide audio and visual alerts. In this
case, fill the clean tank or empty the dirty
tank prior to resuming cleaning.
dock after use to avoid leaving water stains on the floor.
23