Текст страницы
E8 Multi-Surface Brush
E6-2—Rinse the sponge filter and multi-
cyclone assembly with cold water
until they are clean.
Detachable Suction Unit
Basic Parameters
Model
WD5M5A
E8-1—Place the multi-surface brush in the
direction shown in the diagram. Use a
coin-like object/hand to rotate the lock
catch counterclockwise to unlock it.
E6-3—Dry the sponge filter and multi-
cyclone assembly for at least 24
hours to ensure thorough drying.
Rated Voltage/
Current
21.6 VDC/6 A
E8-2—Pull out the lock catch and roller from
the cleaning head.
Battery
21.6 V/4000 mAh (TYP)
Lithium-ion battery
E8-3—Clean the fibers and hair wrapped
around the roller and the lock catch.
Notes:
• Do not put the sponge filter in a dishwasher or
washing machine for cleaning.
• Do not dry the sponge filter in a tumble dryer, oven, or
microwave, nor dry it with hot air or near a fire.
Dock Charger
E8-4—After cleaning, reinstall the lock catch
into the roller.
E6-4—Put the dried sponge filter back into
the multi-cyclone assembly.
Model
MDS16HRR
E8-5—Rotate the lock catch clockwise until
it clicks into place.
Rated Input
Voltage
220-240 VAC
E9 Motorized Mini-Brush
E6-5—Align the multi-cyclone assembly with
the main unit, and turn the multi-
cyclone assembly counterclockwise
to fit it in place.
Rated
Frequency
50-60 Hz
E7 Rear Filter
E9-1—Rotate the lock catch counterclockwise
to the unlock position to remove the
lock catch.
Rated Input
(Charging)
0.35 A
E7-1—Pull the rear filter vertically upwards
to remove it.
E9-2—Pull out the roller from the motorized
mini-brush.
Rated Input
(Drying)
3 A
E9-3—Clean and wash the roller.
Rated Output
30 VDC 1 A
E7-2—Rinse the interior of the rear filter.
Rotate the filter while washing to
ensure that all gaps in the filter can
be cleaned.
E9-4—Stand the roller and dry it for at least
24 hours to ensure thorough drying.
Charging
Battery
21.6 V/4000 mAh (TYP)
Lithium-ion battery
E7-3—Allow at least 24 hours for the filter to
dry thoroughly before reinstalling it.
E9-5—When the roller is thoroughly dry,
reinstall it and the lock catch back in
place.
E7-4—Reinstall the dried filter vertically
downwards into the main unit.
E9-6—Rotate the lock catch clockwise to
the lock position to reinstall the roller
properly.
011