Текст страницы
•
Do not operate after malfunction or damage of cord.
•
Do not grind hard food, such as bones, nuts, ginger or other products with hard fiber.
•
Do not operate for more than 5 minutes at one time. Turn off switch and let it rest for at least 10 minutes to cool down the motor, otherwise the motor may be damaged.
•
If in case of overloading the overheat protection system is activated, switch off the appliance by pressing the button REV/OFF, unplug it, and let the appliance cool down about 20-30 minutes, and then
continue operation.
•
Do not attempt to repair, adjust or replace parts in the meat grinder. Repair the malfunctioning appliance in the nearest service center.
•
The grinder head may rotate slightly during the use, but it is normal.
•
Do not over tighten the fixing ring to stop the movement. It may cause damage.
•
Removable metal parts (screw, cutting knife, cutting plates) can be oxidized after use. It is normal.
BEFORE FIRST USE
•
Unpack your appliance. Remove all packing materials.
•
Check if all parts are in a set and not damaged.
•
Clean all the parts according to the article «Cleaning and maintenance». Do not immerse motor unit into water.
•
Dry thoroughly before use.
CLEANING AND MAINTENANCE
•
Switch off the appliance and make sure that the motor has stopped completely.
•
Unplug the appliance.
•
Disassemble by reversing the assembling steps
•
Press locking button and turn the whole grinder head in the direction of the arrow.
•
Remove the pusher and tray
•
Clean all the attachments and parts right after use.
•
Do not immerse motor unit, plug and power cord in water or keep in running water.
•
Wipe the motor unit with a damp cloth.
•
Wash all the parts that have come in contact with meat in warm soapy water.
•
Do not use abrasives, chlorine containing substances or organic solvents.
•
The metal parts of the meat grinder are not to be washed in the dishwasher!
•
Do not wash all metal parts with hot water which temperature above 40℃. Because it will accelerate metal parts oxidation.
•
After washing please use dry cloth to wipe the metal parts.
•
Wipe all the cutting parts (cutting knife, cutting plates) with vegetable oil.
•
If the meat grinder won't be used for a long time, please wipe all the metal parts by vegetable oil-wet dishcloth.
CAUTION: The blades are sharp and therefore dangerous. Handle with care.
STORAGE: Switch off and unplug the appliance; let it entirely cool.Complete all requirements of Chapter CLEANING AND MAINTENANCE.Keep the appliance in a dry cool place.
SPECIFICATION
Power supply
Producer:
COSMOS FAR VIEW INTERNATIONAL LIMITED
Room 701, 16 apt, Lane 165, Rainbow North Street ,
Ningbo, China Made in China
230 V, 50 Hz
WARRANTY DOES NOT APPLY TO CONSUMABLES (FILTERS, CERAMIC AND NON-STICK COATING, RUBBER SEALS, ETC.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.
Current information about service centers is available on the website https://multimarta.com/
8