Текст страницы
How to charge the ECO-XXXX or MicroTraveler XXXX
with a Micro USB cable
Overview
The instruction
is as follows
USB
Port
(Built-in rechargeable Ni-MH
battery)
Micro USB cable
Pico receiver
Pico Receiver
Power Switch
OFF
ON
Power Switch
Receiver
Storage
Micro Traveler XXXX
ECO -XXXX
For Micro Traveler XXXX Charging Status
LED indicator: Indicates device
Starting/Charging/Battery low
- Starting: LED lights up for three seconds to initiate.
- Charging: LED light is ON.
- Fully charged: LED light is OFF.
- Battery low: LED will flash at a slow speed to indicate low battery power.
Note: If the LED is flashing, you need to recharge the mouse immediately.
Factory Settings
1
2
3
1. Left Button: Provides traditional mouse functions
like click, double click and drag.
2. Right Button: Provides traditional mouse click
functions.
3. Magic-Roller: Press the “Magic-Roller” to surf the
Internet and Windows documents.
Remark : Product images shown on the manual are for reference ONLY.
2.4GHz
Plug and Play
Hardware Installation
1. Plug the receiver connect into the USB port of your computer device.
2. Make sure that you have switched on the power switch underneath the mouse.