Текст страницы
Accessories list
1.Remove the items from the package
Main unit x1
Auto-Empty Station x1
2.Place the Auto-Empty Station and power it
Side Brush ×1
• Do not place the Auto-Empty Station in direct sunlight.
Auto-Empty Station ×1
Mop ×1
2 in 1 dustbin &
water tank ×1
• Make sure there are no obstructions within 0.5 meters on either
side of the Auto-Empty Station and within 1.5 meters in front of
the Auto-Empty Station.
• Please put away the cable to avoid being dragged by the robot,
which may cause the Auto-Empty Station to move or power failure.
Mop bracket ×1
HEPA ×1
Dust bag ×1
Cleaning brush ×1
Quick Start Guide
3.Start-up preparation
Get Ready Before Use
When using for the first time, please move the robot to the Auto-Empty
Station for charging. For daily use, press the “ ” buton on robot to initiate charging.
Power on/Power off/
Start cleaning/Pause cleaning
• Short press to start global cleaning/
Pause cleaning
• Long press 3s to power on/off
Recharge/Pause Recharge
• Short press to recharge/Pause recharge
4.Connect and bind the robot in the App
① Download the Narwal App and follow the instructions for
connecting and binding the robot.
② Long press“ ” + “ ”butons for 3s to enter
network configuration mode.
1. Before starting the robot, please clean up the scatered wires, hard objects and sharp objects (such as nails and
glass) on the ground and remove items that are easy to fall over, fragile and valuable. Avoid personal injury or property
damage caused by entanglement,stuck,draggec or bumped by the robot.
2. If the product is used in the hanging environment, please set the guardrail to prevent the robot from accidentally
falling pushing items to fall, causing personal or property damage.
Note:
1. It is recommended to follow the robot throughout the first cleaning to help deal with some of the problems that may
exist, and then the robot will be able to carry out autonomous cleaning smoothly in the subsequent cleaning.
2. If some areas do not need to be cleaned or may get the robot stuck, you can set a restricted area in the mobile APP to
prevent the host from entering the above areas.
3.Do not let the robot absorb hard or sharp objects (such as decoration waste, glass,nails, etc.), otherwise it may
scratch the robot and the ground.
03