Текст страницы
* Programming start-up
- Press the "
" button , the screen starts to flash, press the "
" or "
" to adjust the set time from 0.5-24 hours.
- In 5 seconds without the operation, the timer start function, then the "Timer"
symbol lights.
- The control will count down the time remaining until start-up. The appliance
will work in the default set( set humidity 50%RH and low fan speed).
- Press the "
" button again to cancel the Timer, and the "Timer "
symbol disappear.
* Programming shut down
- When the appliance is running, press the “
” button, the screen starts to
flash, press the "
" or "
" to adjust the set time from 0.5-24
hours.
- In 5 seconds without the operation, the timer start function, then the " Timer"
symbol lights.
- Press the "
" button again to cancel the Timer, and the " Timer "
symbol disappear.
● CLEAN FILTER
- When the filter needs to be cleaned, the ”Filter” symbol will light up(after 250
hours of use). Remove the filter from the back of unit follow the “CLEAN THE
FILTER” chapters.
- Once the filter is completely dry, place filter back in the unit and hold the
“
” button 3 second to reset the time and the “ Filter “ symbol is turn off.
CAUTION: Do not operate the appliance without the included filter.