Текст страницы
or empty the water bucket
and replace
properly.
Bucket is not in the
proper position.
The bucket must be in
place and securely seated
for the dehumidifier to
operate.
Power Failure.
There is a protective time
delay (up to 3 min.) to
prevent trip - ping of the
compressor overload.For
this reason, the unit may
not start normal dehumidify
for 3 min after it is powered
back on.
Not enough time
allowed for unit to
remove moisture.
When first installed，allow at
least 24 hours to maintain
the desired dryness.
Airflow is restricted.
Make sure there are no
curtains, blinds, or furniture
blocking the front or back of
the dehumidifier. See the
CHOOSING A LOCATION
section.
Dirty filter.
See the CLEAN FILTER
section.
The Humidity Control
may not be set low
enough.
Dehumidifier
does not dry the
air as it should
For drier air, press the
button to lower the percent
humidity desired in the
room，or set the
dehumidifier to “Cont.”
mode for maximum
dehumidify.
Doors and windows
may not
be closed tightly.
Check that all doors,
windows, and other
openings are securely
closed.
Clothes dryer may be
blowing moist air into
the
room.
Install the dehumidifier
away from the dryer.
The dryer should be vented
outside.
Room temperature is
too
low.
Moisture removal is best at
higher room temperatures.
Lower room temperatures