Текст страницы
Demolition Hammer
power tool “live” and could give the opera-
tor an electric shock.
►Use suitable detectors to determine if
utility lines are hidden in the work area
or call the local utility company for as-
sistance. Contact with electric lines can
lead to fi re and electric shock. Damaging a
gas line can lead to explosion. Penetrating
a water line causes property damage or
may cause an electric shock.
►In cold weather, or if the tool has not
been used for a long period of time, al-
low the tool to warm up slightly by turn-
ing it on without load. This will soften the
grease. Without proper warming up, the
impact action will be diffi cult.
Product Description and Specifi-
cations
Read all the safety and general in-
structions.
Failure to observe the safety and
general instructions may result in electric
shock, fi re and/or serious injury.
Please observe the illustrations at the begin-
ning of this operating manual.
Intended use
The machine is intended for heavy chiselling
and demolition work as well as for driving in
and compacting with the appropriate accesso-
ries.
Product features
The numbering of the product features refers
to the diagram of the power tool on the graph-
ics page.
(1) Handle (insulated gripping surface)
(2) On/off switch
(3) Carrying handle
(4) Knurled nut for carrying handle
(5) Locking pin
(6) Work tool (equipment)
(7) Tool holder
(8) Oil gauge window
Technical parameter
Model
GSH90-C2
Rated voltage
220 V~/50 Hz
Power
2500 W
Impact frequency
2000 ipm
Impact energy
75 J
Chuck
hex ker,30 mm
Weight
18.5 kg
Contents of delivery
Demolition hammer
1 pc
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
►Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other condi-
tion that may aff ect the power tool’s op-
eration. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
►Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
►Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be per-formed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
►A good knowledge of power tools re-
sulting from frequent use should not
lead to overconfidence and neglect of
power tool safety. One careless action in
a split second can result in serious injury.
Service
►Have your power tool serviced by a
qualifi ed repair person using only iden-
tical replacement parts. This will ensure
that the safety of the power tool is main-
tained.
Hammer Safety Warnings
►ATTENTION! To avoid damaging the prod-
uct, never use the product as a lever.
-
The tool may vibrate during normal use.
The screws may loosen, resulting in break-
age or accidents. Check the screw tight-
ness carefully before use.
-
Before starting work, make sure that the
equipment is securely fastened.
-
To avoid overheating, take breaks from
work long enough to cool the product.
►Wear ear protectors. Exposure to noise
can cause hearing loss.
►Use auxiliary handle(s), if supplied with
the tool. Loss of control can cause per-
sonal injury.
►Hold power tool by insulated gripping
surfaces, when performing an opera-
tion where the cutting accessory may
contact hidden wiring or its own cord.
Cutting accessory contacting a “live” wire
may make exposed metal parts of the
4