Текст страницы
Demolition Hammer
uct from mechanical damage, atmospheric
precipitation. Remove the battery and replace-
ment tool from the tool before transporting.
Dispose of waste
Damaged power tools, batteries, ac-
cessories and waste packaging mate-
rials must be recycled and reused in
an environmentally friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion
hammer from the rig.
-
With the help of available tools, release
the rig from the material.
-
Install the tooling into the chuck, having
previously cleaned and lubricated the
receiving hole of the chuck and the tool
shank.
►Before working with a hammer at low tem-
peratures, it is necessary to let the engine
idle for a few minutes to warm up the lubri-
cation of the mechanisms.
►During operation, do not place the chuck
close to the surface and do not immerse
it in the ground. Otherwise, the tool may
become clogged with dirt and fail.
Sharpening Chisels
Only sharp chiselling tools will produce good
results, therefore
sharpen your chiselling tools in good time
before use. This will ensure a long service life
for the tools and good work results.
Resharpening
Grind chiselling tools against sanding discs,
e.g. aluminium oxide, under a steady stream
of water. Take care that no annealing coloura-
tion appears on the cutting edges; this impairs
the hardness of the chiselling tools.
Maintenance and Service
Maintenance and Cleaning
►Unplug the power tool before handling
any power tool.
►After finishing work, clean the chuck,
power cord, hammer body and ventila-
tion openings from dust and dirt.
►Remove the rig and clean it of dirt and
grease.
►Check the tightness of the threaded
connections periodically, tighten all
loose connections if necessary.
Service
►Have your power tool repaired only by
qualifi ed personnel and only with origi-
nal spare parts. This ensures the safety
of the power tool.
The list of authorized service centers can be
viewed on the offi cial website of P.I.T. by the
link: https://pittools.ru/servises/
Storage and transportation
Store the instrument in closed rooms with
natural ventilation in a package at an air
temperature of 10 ° C to + 50 ° C and an air
humidity of no more than 80%.
Products can be transported by any type of
closed transport in the manufacturer’s pack-
aging or without it, while preserving the prod-
The fi rst and second digits of the product seri-
al number from left to right
Year of production, the third and fourth digits
indicate the month of production, the fi fth and
sixth digits indicate the production day.
TERMS OF WARRANTY SERVICE
1. This Warranty Certifi cate is the only docu-
ment that confi rms your right to free warranty
service. Without presenting this certifi cate, no
claims are accepted. In case of loss or dam-
age, the warranty certifi cate is not restored.
2. The warranty period for the electric ma-
chine is 12 months from the date of sale,
during the warranty period the service depart-
ment eliminates manufacturing defects and
replaces parts that have failed due to the fault
of the manufacturer free of charge. In the war-
ranty repair, an equivalent operable product
is not provided. Replaceable parts become
property of service providers.
P.I.T is not liable for any damage that may be
caused by operation of the electric machine.
3. Only clean tool accompanied with the
following duly executed documents: this War-
ranty Certifi cate, Warranty Card, with all fi elds
fi lled out, bearing the stamp of the trade orga-
nization and the signature of the buyer, shall
be accepted for warranty repair.
4. Warranty repair is not performed in the fol-
lowing cases:
- in the absence of a Warranty Certifi cate and
a Warranty Card or their incorrect execution;
- with failure of both a rotor and a stator of the
electric engine, charring or melting of primary
winding of the welding machine transformer,
charging or starting-charging device, with in-
ternal parts melting, burn down of electronic
6