Текст страницы
Due to an aluminum boiler the steamer will heat up to operating temperature
in 45 seconds.
7. To steam the trousers, hang them by the clothespins located on the hanger.
Then start steaming by moving the brush up and down.
- SPECIFICATIONS
- Nominal voltage: 220-240 V ~50/60 Hz
- Nominal power rating: 1850–2200 W
- Capacity: 2.9 l
8. DISPOSAL
Upon expiry of its service life the appliance can be disposed of separately from
ordinary domestic waste. You can turn it over to a specialized electric and
electronic appliance disposal and recycling centre.
6. MAINTENANCE AND STORAGE
CLEANING THE WATER TANK
Details: water tank and tank filter. Cleaning frequency:
Clean every month or after every 20 liters of water used.
Stages of cleaning:
1. Open the lid of the water tank by turning it counterclockwise.
2. Drain the remaining water from the tank.
3. Rinse the tank and the lid in clean water, and then put the lid back on the
tank and turn clockwise.
DESCALING
1. Add a 1:1 mixture of water and vinegar to the tank.
2. Install the tank, connect the power cord to an electric socket, turn the
appliance on and let it operate for approx. 10 minutes.
3. After 10 minutes turn the appliance off, disconnect it from power supply and
drain the mixture from the tank.
4. Then add water to the tank, shake the unit several times and drain the water.
Repeat this procedure several times to get rid of scale residue and the smell
of vinegar.
9. CERTIFICATION DATA, GUARANTEE
The service life of this item is 5 years since the date of sale to the end user,
provided the item will be used in strict accordance with the present manual and
the applicable technical standards. Upon expiry of the service life please contact
the nearest authorized service centre for suggestions as to further operation
of the appliance. The manufacturing date of the appliance is integrated into the
serial number (digits 2 and 3 - year, digits 4 and 5 - month of manufacture). I f
any questions related to appliance maintenance should arise, or if the appliance
has malfunctions, apply to the CENTEK TM Authorized Service Center. The
address of the service center can be found on the website https://centek.ru/
servis. Service support contacts: Phone: +7 (988) 24-00-178, VK: vk.com/
centek_krd. General Service Center: OOO «Larina-Servis», Krasnodar, Phone:
+7 (861) 991-05-42. The product has the Certificate of Conformity No.:
ЕАЭС RU С-CN.АЖ49.В.03685/24 of 20.03.2024.
10. INFORMATION ABOUT THE MANUFACTURER, IMPORTER
I mported to EAEU by: I ndividualniy Predprinimatel Asrumyan Karo
Shurikovich. Address: 23 Ataman Lysenko St., 350912 Pashkovskiy, Krasnodar,
Russia. Phone: +7 (861) 2-600-900.
STORAGE OF THE DEVICE
1. Before putting the appliance away for storage let it cool down.
2. Set the steam level selector to “O” and disconnect the unit from power supply.
3. Remove the rack, telescoping struts and water tank.
4. Drain water from the tank and place the power cable to its initial position.
5. Remove deposits from the sole with an acetic acid solution. Wipe the housing
with wet fabric, then wipe it dry.
OPERATING MODES
Refer to the handling symbols on the garment labels when selecting the power
level. Sort the garments according to fabric composition and the respective
ironing temperatures, first steam the garments requiring a lower temperature,
since the steamer will heat up faster than it will cool down.
Check the garment label before steaming to make sure that the garment can
be steamed. You can apply steam to a small piece of fabric to check how steam
affects the fabric.
The steam output level adjustment feature allows saving electricity and distilled
water (it is specifically recommended to use distilled water).
1. Place the assembled appliance on a smooth surface. Adjust the height and
width of the rack and hang the garments on it. Ensure that there is enough
water in the tank and that it is properly installed. Connect the appliance to
power supply. Allow the appliance to heat up. This will take approximately 45
second, after which steam will emerge from the brush. If the hose is kinked,
a characteristic sound will audible. In such case the amount of steam will
be substantially reduced. Raise the handle for 2-3 seconds to eliminate the
problem.
2. Hold the garment by the edges while steaming to spread the creases and
smoothing them out with the hot steam.
3. Start the steaming from the main parts of the garment. Lightly press the metal
panel of the steaming attachment to the garment and move the attachment up
and down at such speed as to allow steam to penetrate the fibers.
4. When steaming a collar you can turn it over, hold one side in your hand and
move the brush horizontally. Be careful not to scald yourself with hot steam.
5. To steam sleeves pull on a sleeve a little to spread it out.
6. After steaming the front of the garment turn it around and steam the back side.
18