Текст страницы
Troubleshooting Guide
Problem
Cause
Solution
The appliance does
not switch on.
The appliance is not
plugged into a mains
socket.
Make sure the appliance is cor-
rectly connected and press the
On/Off button.
Steam comes out
under the base unit.
The “max” pressure safety
system has opened.
Turn the appliance off immedi-
ately and contact an authorised
Braun Customer Service.
Press the steam button several
times away from the ironing
board. This will eliminate cold
water from the steam circuit.
There are some water
drops from the holes
in the bottom of the
soleplate.
Water has condensed
inside the tubes because
steam is being used for the
first time, or has not been
used for some time.
Brown coloured fluid
leaks from the sole-
plate.
Chemical water softeners
or additives have been
poured into the water tank.
Never pour products into the wa-
ter tank. Clean the soleplate with
a damp cloth and rinse the boiler.
Some parts have been
treated with sealer/lubri-
cant which evaporates the
first time the iron heats up.
The first time the
appliance is turned
on, you notice smoke
or smell.
This is normal and will stop when
you have used the iron a few
times. If the smoke/smell is still
present after turning off the
appliance, contact an authorised
Braun Customer Service.
Water is being pumped into
the boiler.
This is normal and no action is
needed.
The appliance emits
an intermittent noise
associated with
vibrations.
The water float does not
work appropriately.
Empty the water tank, rinse out
and refill.
After refilling the
water tank, the icon
does not reset.
The water tank is not posi-
tioned correctly.
Position the water tank correctly.
!
System error.
Unplug the appliance, plug it in
again and press On/Off button. If
this problem is still present, turn
the appliance off immediately,
unplug and contact an author-
ised Braun Customer Service.
17