Текст страницы
Cordless Planer
English
Safety instructions General power
tool safety instructions
while you are tired or under the influ
ence of drugs, alcohol or medication.
A moment of inattention while operating
power tools may result in serious personal
injury.
►Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protec
tion used for appropriate conditions will
reduce personal injuries.
►Prevent unintentional starting. Ensure
WARNING Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Retain these instructions and directions
for future use. The term “power tool” as used
in these instructions and instructions applies
to both mains operated power tools (with
mains lead) and cordless power tools (without
mains lead).
Work area safety
►Keep work area clean and well lit. Clut
tered or dark areas invite accidents.
►Do not operate power tools in explosive
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energizing power tools
that have the switch on invites accidents.
►Remove any adjusting key or wrench
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may ig
nite the dust or fumes.
►Keep children and bystanders away
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in person
al injury.
►Do not overreach. Keep proper footing
while operating a power tool. Distrac
tions can cause you to lose control.
Electrical safety
►Power tool plugs must match the outlet.
and balance at all times. This enables
better control of the power tool in unex
pected situations.
►Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
►If devices are provided for the connec
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce risk
of electric shock.
►Avoid body contact with earthed or
tion of dust extraction and collection
facilities, ensure these are connected
and properly used. Use of dust collection
can reduce dust related hazards.
►Do not let familiarity gained from fre
grounded surfaces, such as pipes, radi
ators, ranges and refrigerators. There is
an increased risk of electric shock if your
body is earthed or grounded.
►Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
►Do not abuse the cord. Never use the
quent use of tools allow you to become
complacent and ignore tool safety prin
ciples. A careless action can cause severe
injury within a fraction of a second.
►ATTENTION! If an interruption occurs in
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
►If operating a power tool in a damp
the power tool due to a total or partial loss
of power or damage to the power control
circuit, turn the power switch to the Off
position, making sure it is not locked (if
fitted). Unplug the power plug or discon
nect the removable battery. This prevents
uncontrolled restarting.
►Qualified personnel in accordance with this
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
Personal safety
►Stay alert, watch what you are doing
manual means persons who are familiar
with the adjustment, installation, commis
sioning and maintenance of power tools.
►Persons at least 18 years of age who have
and use common sense when operating
a power tool. Do not use a power tool
studied the technical description, operating
3