Текст страницы
Cordless Planer
on fire.
►If the battery is damaged or used improp
block has stopped before putting the pow
er tool down. An exposed rotating knife
shaft can become stuck in the surface and
cause loss of control and serious injury.
►ATTENTION! Failure to comply with the
erly, gas may escape. Provide fresh air
and consult a doctor if complaints occur.
The gases can irritate the respiratory tract.
►Clean the battery ventilation slots from
time to time with a soft, dry, clean brush.
►Charge the battery pack without complete
above requirement may result in prod
uct damage and malfunction. This mal
function is not covered by the warranty.
►Do not clean the chip ejection port by
hand. Rotating parts can injure you.
►Move the power tool near the workpiece
ly discharging it. Be sure to stop using the
tool and charge the unit if you notice a de
crease in the power of the tool.
►Never recharge a fully charged battery
pack. Overcharging will shorten the battery
life.
►Charge the battery pack at room tempera
only when it is switched on. Otherwise,
here is a danger of kickback when the
working tool is jammed in the workpiece.
►When working, always hold the planer so
ture. Allow a hot battery pack to cool be
fore charging.
►Charge the lithium-ion battery pack if you
that its sole is flat against the workpiece.
Otherwise, the plane may tilt and cause
injury.
►Never plan on metal objects, nails or
will not be using the tool for a long time
(more than six months).
►Do not open the battery. There is a danger
screws. The blades and cutterblock can be
damaged and result in increased vibration.
►Do not use excessive force when handling
of a short circuit.
►Protect the battery from high temperatures
such as prolonged exposure to the sun,
fire, water and moisture. There is a danger
of explosion.
►Store the battery in a temperature range of
the product. This will not speed up the
planing process, but will only reduce the
quality of the work and shorten the life of
the product.
►Watch out for the ejection of chips from the
0 to 45 ° C. Do not leave the battery in the
car in summer.
►The supplied lithium-ion batteries must
planer: when planing with the maximum
cutting depth, with great pressure, as well
as when planing raw wood, the hole in the
nozzle may become clogged with coarse
or raw chips. Regularly check and clean
the bore to avoid damage.
►Hold the power tool firmly with both hands
when working and be sure your body is
stable. With both hands, you can guide the
power tool more securely.
Product Description and Specifi
cations
be operated in accordance with the dan
gerous goods legislation. For commercial
transport, for example, by a third party
or shipping agent, special warnings and
labels must be applied to the packaging.
Always consult your hazardous materials
professional when preparing your device
for shipment. Also comply with local codes
and ordinances. They can be stricter. Cov
er or secure the open contacts and pack
the battery so that it does not move around
the package.
►Observe local regulations regarding the
disposal of the battery pack.
Service
►Have your power tool serviced by a
qualified repair person using only iden
tical replacement parts. This will ensure
that the safety of the power tool is main
tained.
Safety instructions for planers
►Provide good lighting and ventilation in the
Read all safety warnings and all in
structions.Failure to follow the warn
ings and instructions may result in
electric shock, fire and/or serious injury.
Intended Use
The power tool is intended for planing wood-
based materials such as beams and boards
while resting firmly on the workpiece. It is also
suitable for chamfering edges and for rebat
ing.
Product Features
The numbering of the product features refers
to the illustration of the machine on the graph
ics page.
(1) Cutting depth scale
work area. Large quantities of chips are
generated during the cutting process.
►Before starting work, wait until the cutter
5