Текст страницы
•• During operation do not cover the ventilation slots
with your hands.
Symbol
Meaning
•• Dust generated during operation may be a hazard
to your health, inflammable or explosive; clean your
working place in time and use means of individual pro
tection.
Read all safety regulations
and instructions.
•• When polishing small workpieces too light for reli
able fixation, always use clamping appliances.
Wear safety goggles.
•• Slow the rotation of the accessories caused by iner
tia down with the help of spindle lock or applying force
to the side surface of accessory is strictly forbidden.
Using spindle lock for this purpose will put the power
tool out of operation and void the warranty.
Wear ear protectors.
Wear a dust mask.
Warning: the chemical substances con
tained in dust generated in sanding,
cutting, sawing, grinding, drilling and
other construction industry activities
may result in cancer, congenital deficiency or be
harmful to the fertility. The ion of some chemical sub
stances shall be:
•• Before any repair and replacement work to the ma
chine, the power plug must be pulled out firstly.
Disconnect the power tool
from the mains before instal
lation or adjustment.
Movement direction.
•• The transparent two silicon oxide and other ma
sonry products in the wall bricks and cement; the
chromium arsenic (CCA) in wood with chemical treat
ment. The harm degree of these substances shall
depend on the frequent degree of you carrying out
these works. If you want to reduce the contact with
these chemical substances, please work in the place
with ventilation and you shall use the appliances with
safety certificates (such as the dust mask designed
with tiny dust filter).
Rotation direction.
Locked.
Unlocked.
Hook-and-loop accessories
fastening.
Notice the power voltage: in power connection, you
must confirm that if the power voltage is the same to
the voltage marked in the tool's data plate. If the power
voltage is higher than the appropriate voltage, the acci
dents will be resulted to the operators, and at the same
time, the tool will be destroyed. Therefore, if the power
voltage has not been confirmed, then you shall never
plug in arbitrarily. On the contrary, when the power
voltage is lower than the required voltage, the motor
will be damaged.
Double insulation / protec
tion class.
Symbols used in the manual
Attention. Important.
Following symbols are used in the operation manual,
please remember their meanings. Correct interpreta
tion of the symbols will allow correct and safe use of
the power tool.
Symbol
Meaning
A sign certifying that the
product complies with es
sential requirements of the
EU directives and harmo
nized EU standards.
Polisher
Sections marked gray - soft
grip (with insulated surface).
Do not dispose of the power
tool in a domestic waste
container.
Power tool designation
Serial number sticker:
CT ... - model;
XX - date of manufacture;
XXXXXXX - serial number.
The power tool is designed for polishing surfaces with
liquid polishing compounds.
The area of the tool application can be expanded due
to use of additional accessories.
15
English