Текст страницы
Polisher Machine
Dispose of waste
Damaged power tools, batteries, ac-
cessories and waste packaging mate-
rials must be recycled and reused in
an environmentally friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion
microfiber cloth (by hand) or a sheep’s
wool polishing pad suitable for use on the
machine.
Working advice
Polishing
Select a low speed for polishing in order to
avoid excessive heating of the surface.
Apply the polish onto a somewhat smaller
surface than you intend to polish. Work the
polishing agent in with a suitable polishing
tool applying it crosswise or with circular mo-
tion and moderate pressure.
Do not allow the polishing agent to dry out
on the surface, otherwise the surface can be-
come damaged. Do not subject the surface to
be polished to direct sunlight.
Clean the polishing accessories regularly
to ensure good polishing results. Wash out
polishing accessories with a mild detergent
and warm water; do not use any abrsive or
solvent-based cleaner.
Maintenance and servicing
Maintenance and cleaning
►Before carrying out maintenance work,
changing accessories, etc., as well as
during transport and storage, remove the
battery from the device. There is a risk of
injury if it is switched on unintentionally.
►To ensure safe and efficient operation,
keep power tools and ventilation slots
clean at all times.
Storage and transportation
►The stated shelf life of the machine is 2
years.
Store the tool indoors with natural ventilation
in packaging at an air temperature of 10°C to
+50°C and air humidity not exceeding 80%.
Products can be transported by any type of
closed transport, with or without manufactur-
er’s packaging, while preserving the product
from mechanical damage and precipitation.
Before transporting, remove the battery and
attachments from the device.
Service
►Have your power tool repaired only by
qualified personnel using original spare
parts. This ensures the safety of the
power tool.
A list of authorized service centers can be
found on the official website of P.I.T. link:
https://pittools.ru/services/
The date of manufacture of the product is en-
coded in the serial number printed on the
body of the tool. The first 2 digits indicate the
year of issue, the next 2 digits indicate the
month.
TERMS OF WARRANTY SERVICE
1. This Warranty Certificate is the only docu-
ment that confirms your right to free warranty
service. Without presenting this certificate, no
claims are accepted. In case of loss or dam-
age, the warranty certificate is not restored.
2. The warranty period for the electric ma-
chine is 12 months from the date of sale,
during the warranty period the service depart-
ment eliminates manufacturing defects and
replaces parts that have failed due to the fault
of the manufacturer free of charge. In the war-
ranty repair, an equivalent operable product
is not provided. Replaceable parts become
property of service providers.
P.I.T is not liable for any damage that may be
caused by operation of the electric machine.
3. Only clean tool accompanied with the
following duly executed documents: this War-
ranty Certificate, Warranty Card, with all fields
filled out, bearing the stamp of the trade orga-
nization and the signature of the buyer, shall
be accepted for warranty repair.
4. Warranty repair is not performed in the fol-
lowing cases:
- in the absence of a Warranty Certificate and
a Warranty Card or their incorrect execution;
- with failure of both a rotor and a stator of the
electric engine, charring or melting of primary
winding of the welding machine transformer,
charging or starting-charging device, with in-
ternal parts melting, burn down of electronic
circuit boards;
- if a Warranty Certificate or a Warranty Card
does not correspond to this electric machine
or to the form established by the supplier;
9