Текст страницы
UA | УКРАЇНСЬКА
6
Description (Pic. 1)*
6. Screw for auxiliary handle
EN|ENGLISH
IMPACT DRILL
PS700, PS800Pro, PS1100, PS1350, PS1350M
- Autolock drilling chuck
- “Drilling/lmpact” drilling
MANUAL
Technical specifications
Type
Model
selector switch
3. Ventilation slots
4. Depth stop
5. Auxiliary handle
adjustment
7. Rotational direction switch
8. Speed selector thumbwheel
9. ON/OFF switch
10. Locking button for on/off
switch
PS700
PS800Pro
Voltage,V
220-240
GENERAL SAFETY HINTS FOR WORK WITH ELECTRIC
TOOLS
Frequency, Hz
50
ATTENTION!
◊ Please, read and take note of the following comments that regard
No Load Speen, rpm
0-3300
0-1150
your protection against electric shock and risk of injury and fire.
◊ Verify that the power supply in your area is compatible with the
Power, W
450
450
Chuck diameter, mm
10
10
voltage listed on the machine.
◊ Check the electric tools and electrical connections for any damage.
◊ Connect the power cord to the power source only with the tool turned
Drilling diameter, mm
off.
◊ Always turn on the tool before setting it against the workpiece you
Wood
25
25
Metal
10
10
are working on.
◊ Adopt protective measures against electric shock. Avoid body
Vibration, m/s2
3,27, K=1,5
3,27, K=1,5
contact with earthed parts, such as metal pipes, radiators, cooking
ranges, refrigerators and the l ike.
◊ Large variations in temperature can lead to condensation on live part.
Sound pressure level,
dB(A)
83,51, k=5
83,51, k=5
Before use: Give the machine time to adjust to the temperature of
the work area.
◊ Do not use machines, tools and recommended accessories for works
other than those for which they are designed!
◊ To avoid accidents, do not wear jewelry or loose clothing that could
Sound power level,
dB(A)
94,51, k=5
94,51 , k=5
Protection class
II
be caught up by moving parts. It is recommended to wear protective
footwear and gloves. Long hair should be tied up.
◊ When dust, splinters or shavings area problem while working, or when
Protection category
IP20
Weight, kg
1,62
1,84
working overhead, please, wear protective eyewear and, if necessary,
a protective mask.
◊ In the case of loud noise, wear ear protection.
◊ Be sure you always have safe footing, when working on floors, ladders
Type
Model
and scaffoldings.
◊ Keep electric tools away from humidity and rain. Do not immerse.
◊ When working outdoors, only use approved tools and extension
PS1100
PS1350/1350M
Voltage,V
220-240
cables marked for outdoor use.
◊ Do not use the equipment in areas where danger of explosion exists.
◊ When passing this device over to a third person, these instructions
Frequency, Hz
50
must be handed out, too.
◊ Only have repairs done by specialists using original parts.
No Load Speen, rpm
0-2800
0-2950
WARNING!
Power, W
810
1050
The consumption of alcohol, medication, plus states of illness, fever and
fatigue will affect your ability to react. Do not use electric tools in any of
these situations.
Chuck diameter, mm
13
13
Drilling diameter, mm
◊ Keep electric tools away from children.
◊ Store electric tools in the original box in a safe place and out of the
Wood
25
25
Metal
10
10
reach of children.
◊ When not in use, during breaks, when doing adjustment works,
Into still: 4,84 , K=1,5
changing accessories or during repair, always unplug the cable.
◊ Never carry the tool by the cable. Never unplug the tool by pulling
Vibration, m/s2
3,27, K=1,5
Into concrete: 16,04,
K=1,5
Sound pressure level,
dB(A)
88, k=5
90, k=5
on the cable.
◊ When working, do not allow the motor to stall under load.
◊ Keep your workplace tidy, untidiness can cause accidents!
◊ Avoid abnormal body postures while working.
◊ Avoid switching on or starting up the machine unintentionally.
◊ Do not leave keys, spanners and adjusting tools inserted in the
Sound power level,
dB(A)
99, k=5
101, k=5
machine.
BEFORE WORK
Protection class
II
Autolock drilling chuck (1)
Protection category
IP20
Weight, kg
1,97
2,3
These machines are equipped with autolock tightening chuck for a drill (1).
So, you can manually change the accessories quickly and with a key.