Текст страницы
Item
Descriptions
Picture off
Turns off light source.
To turn on light source again, press any key.
Switch Off Timer
Sets to power off the projector automatically after the
set time.
Auto Sleep
Sets to turn off the projector automatically after the
set time of inactivity.
Note
To protect the battery from over-extended networked standby time, the projector is powered off
after 4 hours of inactivity by default. If you prefer to extend the standby time, follow the procedures.
1. Go to
> All settings > System > Power & Energy > Power & Energy >
Automatically turn off TV when inactive and select Never.
2. Go to
> All settings > System > Power & Energy > Power > Auto Sleep and select an option
that is more than 4 hours.
Shutting down the projector
Press and hold the power key
on remote control / projector for 2
seconds and the projector will shut down directly.
The power LED will flash white. The fans may continue to run in order to
cool the system.
If the projector will not be used for an extended period, unplug the power
cable from the power outlet and remove the batteries from the remote
control.
Note
If you prefer to switch the projector to networked standby mode automatically, set Auto Sleep first.
See "Power settings and options for saving power" on page 35 for details.
2 seconds
1
2 seconds
or
2
36