Текст страницы
USING
7.8.2 ENABELING 3D MODE
To enable 3D mode, the input frame rate should be set to 60Hz. Other frame rate are not supported. For the best 3D
performance, use a resolution of 1920×1080. 4K (3840×2160) resolution is not supported in 3D mode.
1.
Select Display › Display Mode › 3D › 3D Mode.
2.
Select On.
If the 3D Mode is set to Off, the 2D-3D and 3D sync Invert functions will not be selectable.
These functions can only be selected if the 3D mode is set to On.
3.
Press Enter.
4.
If you only want to view the left or right frame: Select Display › Display Mode › 3D › 3D-2D.
Select L (left) or R (right). Press Enter.
5.
If you want to turn off the 3D sync invert function:
- Select Display › Display Mode › 3D › 3D Sync Invert.
- Select Off.
- Press Enter.
7.8.3 ENABLING AUTO 3D MODE
1.
Select Display › Display Mode › 3D › 3D Format.
2.
Select Auto.
3.
Press Enter.
Other options:
- SBS: Display 3D signal in “Side-by-Side” format.
- Top and Bottom: Display 3D signal in “Top and Bottom” format.
- Frame Sequential: Display 3D signal in “Frame Sequential” format.
[page 36] | infocus.com