Текст страницы
CLEANING
8.14 DIRECTLY CONNECTING A COMPUTER TO THE PROJECTOR
1.
Select Network > LAN > DHCP.
2.
Select Off.
3.
Press Enter.
4.
Select Network > LAN.
5.
Configure the IP address, Subnet Mask, Gateway, and DNS settings.
6.
Set the computer to use the same IP address, subnet mask, gateway, and DNS settings.
7.
Open a web browser.
8.
Type the projector’s IP address type the user name and password. The default user name and password is
admin.
INFORMATION
Only applicable to Superior Series.
9. CLEANING
Do not use canned air or any type of abrasive pad, paper towel, scouring powder, glass cleaner, or solvent (such as
alcohol, paint thinner or benzene).
Unplug the projector before cleaning.
9.1
CLEANING THE LENS
Clean the projector’s lens with a lightly damp cloth. Do not spray liquid directly onto the lens.
9.2
CLEANING THE CASE
Clean the projector’s case using a lightly damp cloth.
9.3
CLEANING THE AIR VENTS
Clean the air intake vents with a soft and dry cloth, a soft brush, or a small vacuum cleaner designed for cleaning
electrical devices.
10. SANITATION
• Using only lightly dampened microfibre cloth to avoid malfunction and possible permanent damage to
electronic parts, lightly clean the surface of the product, avoiding any connection points, ventilation holes
or the lens.
• After the application, dry the product with a clean and dry microfibre cloth.
Please follow all safety and handling instructions listed with the cleaning solution and keep out of reach of children.
For schools conducting an overall deep clean of their facilities, here are steps to appropriately protect your InFocus
product in advance of chemicals being sprayed or fogging devices being employed:
• Disconnect the product from its power source.
• Cover the product to prevent damage to internal electronic components.
• Remember to remove any covering before use.
Please ensure that those with access to your InFocus products are aware of the cleaning procedure.
infocus.com | [page 45]