Инструкция проектор ViewSonic M1 Pro

Power on by Power Bank Function

The projector can also be powered by a power bank.

1

2

15V/3A

To power your projector:

1. Connect one end of the USB Type C cable to the USB-C port of the projector.

2. Connect the other end of the USB Type C cable to the power bank.

NOTE:

• The power bank should be 45W (15V/3A) at least, and support Power
Delivery (PD) protocol output. Additionally, at 15V/3A the projector can be
powered on and charge simultaneously.
• Due to the IC protection mechanism, the USB-C charging function may stop
briefly then continue later on.

Using the Battery
The battery level icon will show at the top right of the Home Screen. As the
battery’s power level runs low, the screen will show a “low battery message”.

Battery Usage Time Information

Charging About 2 hours (Power Off)

up to 4.4 hours (Battery Saving)

Usage Hours

up to 2 hours (Eco)
up to 1.3 hours (Full)

Battery Level Indicator (Charging) During Charging: Flashing White LED light

Full Charge: Solid White LED light

16