Текст страницы
Setting Auto Power Off
This function allows the projector to turn off automatically after a set period of time
once no input source is detected to prevent unnecessary waste of lamp life.
1.
Open the OSD menu and go to the POWER MANAGEMENT > Smart Energy
menu.
2.
Press Enter and the Smart Energy page is displayed.
3.
Highlight Auto Power Off and press
/
.
4.
If the preset time lengths are not suitable for your need, select Disable. The projector
will not automatically shut down in a certain time period.
Setting Sleep Timer
This function allows the projector to turn off automatically after a set period of time to
prevent unnecessary waste of lamp life.
1.
Open the OSD menu and go to the POWER MANAGEMENT > Smart Energy
menu.
2.
Press Enter and the Smart Energy page is displayed.
3.
Highlight Sleep Timer and press
/
.
4.
If the preset time lengths are not suitable for your presentation, select Disable. The
projector will not automatically shut down in a certain time period.
Setting Power Saving
The projector lowers the power consumption if no input source is detected after 5 minutes to
prevent unnecessary waste of lamp life. You can further decide if you would like the
projector to turn off automatically after a set period of time.
1.
Open the OSD menu and go to the POWER MANAGEMENT > Smart Energy
menu.
2.
Press Enter and the Smart Energy page is displayed.
3.
Highlight Power Saving and press
/
.
4.
When Enable is selected, the projector lamp will be changed to Eco
mode after no signal is detected for 5 minutes.
The lamp power will be changed to SuperEco mode after no
signal is detected for 20 minutes.
48