Текст страницы
MMX 330 PRO — Gaming Headset
5
How to connect the headset to a game console
f Bend the flexible gooseneck so that the microphone is
placed about two centimetres in front of your mouth.
EN
In contrast to a PC, game consoles only have one mini
jack connection (3. 5 mm).
f Connect the supplied adapter and the cable to your
game console as illustrated.
In order to avoid overstretching and
premature wear and tear never bend the
gooseneck more than 90°.
f Optionally, you can purchase a 1. 2 m long console
cable (order # 918105) with a mini jack plug (3. 5 mm).
Remote control
The connection cable has an integrated remote control
with a volume control and a mute switch. Use the
volume control to adjust the volume of the headset. Use
the mute switch to mute or activate the microphone.
Increase the volume:
f Turn the volume control upwards.
Reduce the volume:
f Turn the volume control downwards.
Mute the microphone:
f Slide the mute switch downwards
(red marking visible).
Activate microphone:
f Slide the mute switch upwards
(red marking not visible).
Putting on the headset
f Put the headset on your head. The microphone is on
the left-hand side.
Mute switch:
Microphone
active
Mute switch:
Microphone
muted
Volume control
Volume control
f Position the microphone in front of the middle of your
mouth. In order to avoid pop noise, you should use
the microphone with a pop shield.
Adjusting the headband
MAINTENANCE
f To optimise the wearing comfort, adjust the head-
band of the headset to your head via the adjustable
yokes on the left and right side of the housing shells.
f Wear the headset so that the headband runs over
the centre of your head and adjust the headband
so that
y your ears are completely enclosed by the ear pads,
y you feel a gentle pressure around your ears,
y both ends of the headband have the same length.
f As with any equipment which will be used near
sensitive areas of the body, it is essential that the
ear pads and headband are kept clean.
Use a soft cloth moistened with water for cleaning.
Make sure that no water drops into the ear cups or
transducers.
Adjusting the microphone
f If necessary, you can carefully remove the ear pads
and headband pad and clean them with mild soapy
water.
f Turn the microphone holder (never the gooseneck!)
to position the microphone as requested.
Never use any solvent cleaning agents!
Furthermore, the pads must be completely
dry before they are reattached to the
MMX 330 PRO.
Never use a vaccum cleaner for cleaning the
MMX 330 PRO, as this may cause irreparable
damage.
f Should it become necessary to replace the ear pads
or the headband pad, refer to “Replacement parts
and Accessories”. You can easily do this yourself.
Refer to the chapters “How to change the ear pads”
and “How to change the headband pad”.
f If other components must be replaced, please
contact your local beyerdynamic representative.
f Make sure that the pop shield completely encloses
the microphone.