Текст страницы
3 Use
3.6.1 Adjusting the suction
power
3.8 Switching off and parking
the vacuum cleaner
1. Switch off the appliance with the on/off button
(6) and unplug it.
2. Wind the electric cable inside the appliance
You can adjust the suction power of the appliance
by turning the suction power button (3) located on
the body of the device clockwise according to the
type of the surface to be cleaned. To decrease the
suction power turn the button counterclockwise.
by gently pulling and releasing the cable (the
appliance will automatically take the cable
inside) or by pressing the cable winding button
(2)
3.7 Accessories
Vertical parking
There is an accessory carrier (16) on the
telescopic pipe (14) of the appliance. You can use
it by attaching 2 accessories supplied with the
appliance.
Insert the hook of the parquet/carpet brush (12)
into the parking channel located at the bottom
section of the appliance.
Horizontal parking feature
C
If you do not want to use accessory
carrier (16), unscrew it with the aid
of a screwdriver and remove it from
the telescopic pipe (14).
Insert the hook of the parquet/carpet brush (12)
into the parking channel (5) located at the rear
section of the appliance.
Crevice tool
You can carry the appliance by holding it from the
carrying handle (4).
Suitable for the cleaning
of the surfaces which are
difficult to clean, such as the
areas remaining under the
sofas and furniture.
Wide-mouth nozzle
Suitable for the cleaning of
the floorings, stair steps,
inside of the cars, sofas,
armchairs etc.
Dust brush
Suitable for the cleaning of
curtains, and sensitive and
fragile objects.
WARNING: Do not make cleaning
by using the handle's (18) end part.
A
8 / EN
Vacuum cleaner / User manual