Текст страницы
EN
Battery Status Display
Settings
1. Battery Status Indicator
Blinking white
Solid white
In the standby state, press and hold the
suction level switch
for 3 seconds to
enter the setting interface. Briefly press the
switch button
to select an option, and
press and hold
for 3 seconds to confirm.
Off
Charging
Reset Filter
Fully charged
Charging
Press and hold the suction level switch
for
3 seconds to select resetting filter and the
filter will automatically complete the reset.
Standby Mode
Exit
Fig. D-2
2. Display Screen
Press the power button
when it is in the
setting interface to return to the main interface
directly, or select
, then press and hold
for
3 seconds to return to the main interface.
Fig. E-2
The number on the display screen
represents the current battery level in a
percentage during charging. When the
number becomes 100, the battery is fully
charged.
Note:
Fig. D-3
• If there is no operation for more than 15
seconds, the screen will turn off, and it will
return to the main interface when lit up
again.
How to Use
Display Screen
1. Dirty Level Indicator
The color changes with the amount of
dust in real time (only in Auto Mode).
• In a high altitude area, it is recommended
to switch to high-altitude mode before use
to avoid abnormal use (press and hold the
suction level switch for 3 seconds until the
setting is displayed, then press and hold
the power button for 3 seconds to enter/
exit the high altitude mode).
- Particulate Matter Amount Indicator
- Suction Level
Eco
Auto
• If the vacuum is not working properly, the
screen display will show an error message.
Please refer to the troubleshooting table to
find your solution.
Turbo
Starting Cleaning
4. Suction Level Switch
Press briefly to switch between eco,
auto and turbo mode.
5. Particulate Matter Types
＞ 10μm (eg. pollen)
＞ 50μm (eg. hair)
＞ 200μm (eg. dust)
＞ 500μm (eg. mite)
Press the power button
to start operating.
After the vacuuming is completed, press
the
button and the amount of various
particle matters vacuumed will show on the
screen.
Press the button
to switch levels between
auto, eco and turbo and the corresponding
icon will show on the screen.
6. Battery Level Percentage
Note:
When the display screen shows "LO", it
indicates that the battery level is lower
than 10%.
Press briefly to turn on/off
7. Power Button
• When any cleaning mode stops running,
the vacuum cleaner will default to auto
mode when it is started again. Factory
default setting is the auto mode.
Fig. E-1
4