Текст страницы
3. Display Screen
Caring For Your SYNCO Product
Product Instruction
Noise Reduction on
Power Indicator
②Type-C port digital output
The receiver Type-C port has a digital output function, which can directly
use the Type-C to Type-C cable to output mobile phones or computers
and other devices.
Recording
Disconnected
Connecting
Muting
Disconnected
Connecting
Connected
③ Successfully Connected show as the picture
Audio Dynamic
Display
TX Transmitter
Connected
· Please keep the product in a dry, clean, dust-free environment.
· Keep corrosive chemicals, liquids and heat source away from the
product to prevent mechanics damage.
· Use only a soft and dry cloth for cleaning the product.
· Malfunction may be caused by dropping, impact of external force.
· Do not attempt to disassemble the product. Doing so voids warranty.
· Please have the product checked or repaired by authorized technicians
if any malfunctions happened.
· Failure to follow all the instructions may result in mechanics damage.
· Warranty does not apply to human errors.
Power Indicator
1. TX Transmitter
Recording Mode:
Mono/ Stereo/ Safety
*Note: Before successful connection, the transmitter channel displays
A by default. The transmitter connected to the receiver first is the
transmitter A, and the later one is the transmitter B.
TX B
TX A
Gain of TX B
Package List
3. Channel output connection
⑥ Noise Reduction
⑦ Gain Adjustment of TX
⑧ Magnet Pocket Clip
Gain of TX A
*Note: When connecting the computer, enter the sound Settings and
set the input microphone to SYNCO G2Pro to use G2 recording; Set the
output speaker to SYNCO G2 Pro to use real-time ear return in the receiver
listening interface.
① External Mic Input
② Type-C Charging Port
③ On/ Off Button
④ Built-in Mic
⑤ Display Screen
RX Receiver
Audio Dynamic
Display of TX B
Audio Dynamic
Display of TX A
①3.5mm OUT output
The receiver outputs the audio signal to the recording device via either a
3.5mm TRRS phone cable or a 3.5mm TRS camera cable. Please use the
appropriate cable according to your device.
3.5mm TRS Camera Cable
Carrying Bag x1
1. Power On/ Off
Operations
RX Receiver x1
TX Transmitter
x2
3.5mm TRRS Phone Cable
4. Real-time monitoring
The 3.5mm monitoring port of the receiver supports digital monitoring,
which can simultaneously monitor the sound source of the transmitter
and the input sound source of the device.
Power On
The TX and RX automatically turn on when long press the power button
for 3 seconds, and the display screen lights up.
Apple Adapter (With MFI Certification)
3-in-1 Charging Cable x1
External Lav Mic (With Wind Muff) x2
2. RX Receiver
Power Off
The TX and RX automatically turn off when long press the power button
for 3 seconds, and the display screen lights off.
3.5mm Monitoring Jack
Headphone Impedance: under 100 Ω
*Note: When using an external microphone, please insert it correctly
into the microphone input jack. Only TRS interface microphones are
supported.
2. Pairing
Microphone G2A2
User Manual
3.5mm TRRS Phone Cable x1
3.5mm TRS Camera Cable x1
Automatic Pairing
Automatically pairing after the TX/RX turns on.
5. Volume Control
① Press the power button on the TX to turn on/off the mute.
② Short press the gain adjustment button of the TX to adjust the volume
for 6 levels (0-3-6-9-12-15).
③ Short press the gain adjustment of A/B TX buttons on the RX to adjust
the volume of A/B TX.
① Type-C Charging Port / Digital Output
② On/ Off Button (Mono / Stereo / Safety Channel)
③ 3.5mm TRS Output
④ 3.5mm Monitoring Port
⑤ Display Screen
⑥ Gain Adjustment of TX A
⑦ Gain Adjustment of TX B
⑧ Magnet Pocket Clip
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
Manual Pairing
① Long press the transmitter and receiver at the same time for 3 seconds
to power off .
② After shutdown, long press the power button of the transmitter and
receiver for 8 seconds at the same time to enter the [connecting ] state.
Mic Windshield x2
Magnet x2
User Manual X1